NSN 5305-01-175-6946
High Torque Screw
Between 0.823 inches and 0.853 inches fastener length, flat countersunk head style, between 0.376 inches and 0.385 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number HT4049-3-9 for national stock number 5305011756946.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-175-6946.
-
MPN or Model
HT4049-3-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 0.823 inches and 0.853 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.385 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-218-1451 MPN HT4060V5-4ASShoulder Screw
- 5305-00-316-7532 MPN RA62007-107Machine Screw
- 5305-00-390-0186 MPN NAS1189E3P6LSocket Head Cap Screw
- 5305-00-458-1912 MPN NAS1221-3-5Machine Screw
- 5305-00-510-5283 MPN LS15263V06-10Machine Screw
- 5305-00-928-9648 MPN 51B335-5Machine Screw
- 5305-00-935-7513 MPN NAS1101-00-3Machine Screw
- 5305-01-123-7098 MPN E516-410Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-175-6946 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4049-3-9 | Huck International, Inc. |
HT4049-3-9 | Hi-shear Corporation |
HT4049-3-9 | Sps Technologies, Llc |
HT4049-3-9 | Alcoa Global Fasteners, Inc. |
HT4049-3-9 | Lisi Aerospace Canada Corp |
ST3M714-3-9 | Boeing Company, The |
11931-3-9 | Reid Products Inc. |
HT4049-3-9 | Deutsch Fastener Corp |
HT4049-3-9 | Huck Intl Inc |
HT4049-3-9 | Sps Technologies, Llc |