NSN 5305-01-176-8175
High Torque Screw
Between 0.691 inches and 0.721 inches fastener length, flat countersunk head style, between 0.339 inches and 0.381 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number LD111-0044-2306 for national stock number 5305011768175.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-176-8175.
-
MPN or Model
LD111-0044-2306
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.316 inches and 0.346 inches -
Fastener Length
Between 0.691 inches and 0.721 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
0.375 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-316-8140 MPN ST3M455-3L3-1Close Tolerance Screw
- 5305-00-505-2833 MPN LS15267V3-34Machine Screw
- 5305-01-158-6763 MPN SC2671-3-16Machine Screw
- 5305-01-276-9471 MPN BACB30LH3-13Close Tolerance Screw
- 5305-01-482-1167 MPN BACB30LE5K8Machine Screw
- 5305-01-513-8905 MPN VCL0010-6-20Close Tolerance Screw
- 5306-00-211-8397 MPN BACB30FD16-24Shear Bolt
- 5306-00-839-1871 MPN MS21250-10030Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-176-8175 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0044-2306 | Boeing Company, The |
LD111-0044-2306 | Sps Technologies, Llc |
LD111-0044-2306 | Sps Technologies, Llc |
LD111-0044-2306 | Hi-shear Corporation |
LD111-0044-2306 | Sps Technologies, Llc |
LD111-0044-2306 | Lisi Aerospace Canada Corp |
LD111-0044-2306 | Valley-todeco, Inc. |
LD111-0044-2306 | Sonic Industries Inc. |
LD111-0044-2306 | Sps Technologies, Llc |