NSN 5305-01-177-0876
High Torque Screw
Internal drive ribbed.
Manufacturer part number LD111-0047-0408 for national stock number 5305011770876.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-177-0876.
-
MPN or Model
LD111-0047-0408
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.382 inches and 0.412 inches -
Fastener Length
Between 0.882 inches and 0.912 inches -
Head Style
Fillister countersunk -
Head Diameter
0.397 inches -
Head Height
0.018 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
0.500 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-151-8656 MPN GS551P4-621Close Tolerance Screw
- 5305-00-316-8140 MPN ST3M455-3L3-1Close Tolerance Screw
- 5305-00-354-4240 MPN HT4024L3-12Close Tolerance Screw
- 5305-01-059-2647 MPN NAS1101-06-18Machine Screw
- 5305-01-116-3085 MPN NAS1101-06H3Machine Screw
- 5305-01-160-7561 MPN HT4027-5-18Close Tolerance Screw
- 5305-01-298-2442 MPN AIC984-3-8RClose Tolerance Screw
- 5305-01-312-5872 MPN AIC9535-6-24Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-177-0876 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0047-0408 | Boeing Company, The |
LD111-0047-0408 | Sps Technologies, Llc |
LD111-0047-0408 | Sps Technologies, Llc |
LD111-0047-0408 | Sonic Industries Inc. |