NSN 5305-01-179-2439
High Torque Screw
Between 1.016 inches and 1.046 inches fastener length, flat countersunk head style, between 0.497 inches and 0.507 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number ST3M454-4DL9 for national stock number 5305011792439.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-179-2439.
-
MPN or Model
ST3M454-4DL9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.444 inches and 0.494 inches -
Fastener Length
Between 1.016 inches and 1.046 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.081 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.895 inches first hole and 0.935 inches first hole -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-141-7195 MPN 11879C5-9AShoulder Screw
- 5305-01-444-2398 MPN 11925C4-9AClose Tolerance Screw
- 5305-01-462-2714 MPN 11827D5-15AClose Tolerance Screw
- 5305-01-481-9375 MPN 11825D4-7AFClose Tolerance Screw
- 5305-01-513-9648 MPN 11923-5-7Close Tolerance Screw
- 5306-01-265-3354 MPN 11825-3-13Close Tolerance Bolt
- 5320-00-108-1204 MPN TL230-3-6Pin-rivet
- 5320-00-286-0680 MPN TLV200-3-8EPin-rivet
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-179-2439 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M454-4DL9 | Boeing Company, The |
HT4025L4D9 | Huck Intl Inc |
HT4025L4D9 | Alcoa Global Fasteners, Inc. |
11905-4DL9 | Reid Products Inc. |
HT4025L4D9 | Hi-shear Corporation |
HT4025L4D9 | Sps Technologies, Llc |
HT4025L4D9 | Lisi Aerospace Canada Corp |