NSN 5305-01-180-2553
High Torque Screw
Between 1.320 inches and 1.350 inches fastener length, flat countersunk head style, 0.5066 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number LD111-0044-2415 for national stock number 5305011802553.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-180-2553.
-
MPN or Model
LD111-0044-2415
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.372 inches and 0.422 inches -
Fastener Length
Between 1.320 inches and 1.350 inches -
Head Style
Flat countersunk -
Head Diameter
0.5066 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.928 inches and 0.948 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-435-6611 MPN BACB30LU9-26Close Tolerance Screw
- 5305-01-462-2840 MPN 3M1169V4-9AClose Tolerance Screw
- 5305-01-512-8416 MPN 3M1170C3-9AFClose Tolerance Screw
- 5305-01-513-8650 MPN TX1024C9D31-8AClose Tolerance Screw
- 5306-00-409-3290 MPN BACB30LJ6DU20Close Tolerance Bolt
- 5306-00-869-0945 MPN VFK100G-05006Shear Bolt
- 5306-00-960-5455 MPN BACB30LJ4DU15Close Tolerance Bolt
- 5306-01-014-5125 MPN VAL23029-5-14Close Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-180-2553 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0044-2415 | Boeing Company, The |
LD111-0044-2415 | Valley-todeco, Inc. |
LD111-0044-2415 | Sps Technologies, Llc |
LD111-0044-2415 | Sps Technologies, Llc |
LD111-0044-2415 | Sonic Industries Inc. |
LD111-0044-2415 | Sps Technologies, Llc |
LD111-0044-2415 | Hi-shear Corporation |
LD111-0044-2415 | Sps Technologies, Llc |