NSN 5305-01-180-2554
High Torque Screw
Internal drive ribbed.
Manufacturer part number LD111-0044-2414 for national stock number 5305011802554.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-180-2554.
-
MPN or Model
LD111-0044-2414
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.372 inches and 0.422 inches -
Fastener Length
Between 1.257 inches and 1.287 inches -
Head Style
Flat countersunk -
Head Diameter
0.5066 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-038-9556 MPN BACB30LH3-4Close Tolerance Screw
- 5305-01-417-2491 MPN 3M1169V4-19AClose Tolerance Screw
- 5305-01-513-9648 MPN ST3M557-5-7Close Tolerance Screw
- 5305-01-535-6835 MPN 3M1170C3-10AFClose Tolerance Screw
- 5305-01-600-8315 MPN PMT1123-4Close Tolerance Screw
- 5306-01-141-7874 MPN VAL23608-4D14Shoulder Bolt
- 5306-01-182-2425 MPN 9962M36P01Shoulder Bolt
- 5306-01-198-8248 MPN BACB30LM4DH16Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-180-2554 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0044-2414 | Boeing Company, The |
LD111-0044-2414 | Sps Technologies, Llc |
LD111-0044-2414 | Arconic Global Fasteners & Rings, |
LD111-0044-2414 | Sps Technologies, Llc |
LD111-0044-2414 | Sps Technologies, Llc |
LD111-0044-2414 | Sonic Industries Inc. |
LD111-0044-2414 | Hi-shear Corporation |
LD111-0044-2414 | Lisi Aerospace Canada Corp |
LD111-0044-2414 | Boeing Company, The |
LD111-0044-2414 | Valley-todeco, Inc. |
LD111-0044-2414 | Sps Technologies, Llc |