NSN 5305-01-180-8697
High Torque Screw
Between 0.823 inches and 0.853 inches fastener length, flat countersunk head style, between 0.376 inches and 0.385 inches head diameter, locking feature: patch threads.
Manufacturer part number NAS1163E8B for national stock number 5305011808697.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-180-8697.
-
MPN or Model
NAS1163E8B
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.313 inches and 0.363 inches -
Fastener Length
Between 0.823 inches and 0.853 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.385 inches -
Locking Feature
Patch threads -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Plastic locking feature -
Material Specification
Ams5737 assn standard single material response fastener -
Surface Treatment
Passivate fastener -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response fastener -
Thread Series Designator
Unjf -
Specification Data
80205-nas1163 professional/industrial association standard
More from these suppliers
- 5940-00-465-6149 MPN NAS1745-9Conductor Splice
- 5940-01-451-4409 MPN NAS1063A2-107AKTerminal Board Marker Strip
- 5305-00-003-6824 MPN NAS6002U26Machine Screw
- 5305-00-057-0533 MPN MS51958-49Machine Screw
- 5305-00-057-0534 MPN NASM51958Machine Screw
- 5305-00-058-2067 MPN MS24677-7Socket Head Cap Screw
- 5305-00-058-9389 MPN MS51977-74Setscrew
- 5305-00-078-8606 MPN NAS560HK3-15Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-180-8697 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1163E8B | National Aerospace Standards |