NSN 5305-01-180-9102
Bolt Stove
Between 0.183 inches and 0.188 inches fastener length, fillister head style, between 0.083 inches and 0.096 inches head diameter, head height: between 0.033 inches and 0.038 inches .
Manufacturer part number C320009148 for national stock number 5305011809102.
Datasheet
-
Product description
Machine Screw NSN 5305-01-180-9102.
-
MPN or Model
C320009148
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.158 inches and 0.188 inches -
Fastener Length
Between 0.183 inches and 0.188 inches -
Head Style
Fillister -
Head Diameter
Between 0.083 inches and 0.096 inches -
Head Height
Between 0.033 inches and 0.038 inches -
Internal Drive Style
Slot -
Thread Diameter
0.060 inches -
Thready Qty Per Inch (tpi)
80 -
Min. Tensile Strength (psi)
80000 pounds per square inch -
Screw Material
Steel comp 303 or steel comp 305 -
Screw Material Specification
Astm a582 cond a assn standard single material response or qq-s-763 cond a federal specification single material response -
Screw Surface Treatment
Passivate -
Screw Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5950-00-021-9079 MPN C702822234Reactor
- 4920-00-342-3979 MPN KT419007Indicator Test Set
- 5905-00-549-5333 MPN 120-33-2ISSUE7Film Fixed Resistor
- 5905-00-880-0942 MPN G121-698-014Nonprecision Wire Wound Variable Resistor
- 5985-01-064-5881 MPN G7117-010Waveguide Assembly
- 5935-01-397-6994 MPN A520A986-102Electrical Receptacle Connector
- 5935-01-370-5951 MPN A314A773-116Electrical Plug Connector Body
- 5305-01-071-3383 MPN A320A307-0108Machine Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-180-9102 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C320009148 | Kearfott Corporation |