NSN 5305-01-181-7465
Panel Screw
Quad lead thread.
Manufacturer part number CA13026-7 for national stock number 5305011817465.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-181-7465.
-
MPN or Model
CA13026-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.156 inches -
Fastener Length
Between 0.451 inches and 0.466 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.238 inches and 0.279 inches -
First Diameter From Head
Between 0.105 inches and 0.110 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.194 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.138 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
100.0 degrees -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel comp 302 or steel comp 302b or steel comp 303 or steel comp 303 plus x or steel comp 303se or steel comp 303cu or steel comp 303ma or steel comp 304 or steel comp 304l -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5905-00-097-7017 MPN 6083580Film Fixed Resistor
- 5935-00-513-4251 MPN 6090268-1Electrical Plug Connector
- 4920-01-240-9729 MPN 106A177Radio Frequency Test Station
- 5935-01-246-2800 MPN 6133498-11Electrical Receptacle Connector Body
- 5935-01-569-3936 MPN 229A676-13Electrical Connector Backshell
- 5935-01-062-2170 MPN 6091552-3Electrical Connector Bushing Retainer Nut
- 5935-01-630-7997 MPN 257A535-14Electrical Connector Backshell
- 5985-01-650-6521 MPN PRT-AT-TEL-KITAntenna
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-181-7465 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA13026-7 | Arconic Global Fasteners & Rings, |
6116886-4 | Lockheed Martin Corporation |