NSN 5305-01-181-7482
High Torque Screw
Internal drive ribbed.
Manufacturer part number NAS1580A3R9 for national stock number 5305011817482.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-181-7482.
-
MPN or Model
NAS1580A3R9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.338 inches and 0.398 inches -
Fastener Length
Between 0.910 inches and 0.940 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.3390 inches and 0.3813 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 1680-00-226-0555 MPN NAS303-25-5133Arrestin Cable Assy
- 5940-01-384-3892 MPN NAS1063A8TB98TTerminal Board Marker Strip
- 1680-01-501-4805 MPN NAS42DD8-80FCAircr Sleeve Spacer
- 1680-01-547-3391 MPN NAS77A8-008PPre Flanged Bushing
- 5940-01-384-3924 MPN NAS1063C5TB177ATerminal Board Marker Strip
- 1560-01-659-0276 MPN 520-14082-2Aircraft Structural Component Support
- 5305-00-058-9369 MPN MS51977-31Setscrew
- 5305-00-061-0227 MPN MS24677-20Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-181-7482 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580A3R9 | National Aerospace Standards |