NSN 5305-01-182-4279
High Torque Screw
Between 2.785 inches and 2.815 inches fastener length, flat countersunk head style, between 0.464 inches and 0.506 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number WC4054-438A for national stock number 5305011824279.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-182-4279.
-
MPN or Model
WC4054-438A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.400 inches and 0.450 inches -
Fastener Length
Between 2.785 inches and 2.815 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.506 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 2.365 inches and 2.385 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 8740 -
Material Specification
Mil-s-6049 military specification single material response -
Surface Treatment
Aluminum and chromate -
Surface Treatment Specification
Mil-c-83488, type 2, cl 3 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-610-2371 MPN MS25224-1Switch Guard C2 Nrp
- 5305-01-211-6051 MPN LE111-0032-0037Machine Screw
- 5305-01-512-8359 MPN WC1170C5-18AClose Tolerance Screw
- 5306-01-045-9504 MPN WC507-3-20Shoulder Bolt
- 5320-00-279-4723 MPN HL219-8-22Pin-rivet
- 5320-00-959-0120 MPN HL54-8-13Pin-rivet
- 5320-01-014-6206 MPN HL114-10-15Pin-rivet
- 5320-01-086-4965 MPN HL86W-5Pin-rivet Collar
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-182-4279 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
WC4054-438A | West Coast Aerospace Inc |
HT4054-4-38A | Hi-shear Corporation |
HT4054-4-38A | Lisi Aerospace Canada Corp |
HT4054-4-38A | Sps Technologies, Llc |
ST3M730-4L38 | Boeing Company, The |
HT4054-4-38A | Triman Industries Inc |
HLT4054-4-38A | Huck Intl Inc |
HT4054-4-38A | Huck Intl Inc |
10115554 | Nimikkeistokeskus Ncb Finland |
HT4054-38A | Sps Technologies, Llc |
HT4054-4-38A | Alcoa Global Fasteners, Inc. |
HT4054-4-38 | Sps Technologies, Llc |
HT4054-4-38 | Alcoa Global Fasteners, Inc. |
HT4054-4-38 | Hi-shear Corporation |
ST3M730-4-38 | Boeing Company, The |