NSN 5305-01-182-7674
High Torque Screw
Between 1.917 inches and 1.947 inches fastener length, flat countersunk head style, between 0.447 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number AIC984-4-25 for national stock number 5305011827674.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-182-7674.
-
MPN or Model
AIC984-4-25
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.345 inches and 0.395 inches -
Fastener Length
Between 1.917 inches and 1.947 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.447 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 1.552 inches and 1.572 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-494-8512 MPN C3606-7Close Tolerance Screw
- 5305-00-880-7768 MPN AIC551C3-585Shoulder Screw
- 5305-00-891-3674 MPN 207-12-2Shoulder Screw
- 5305-00-916-4615 MPN AIC1023H6-26Close Tolerance Screw
- 5305-00-916-4879 MPN AIC1024-3-4Machine Screw
- 5305-01-076-4889 MPN NAS1101-08-26Machine Screw
- 5305-01-189-7455 MPN AIC4040V3-06Close Tolerance Screw
- 5305-01-329-9737 MPN AIC1652-4-17Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-182-7674 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC984-4-25 | Sps Technologies, Llc |
VT1693F4-25 | Arconic Global Fasteners & Rings, |
PBF1165-4-25 | Sps Technologies, Llc |
121557-4-A25P | Sps Technologies, Llc |
VT1693F4-25 | Alcoa Global Fasteners, Inc. |
C7984-4-25 | Lockheed Martin Corporation |
C7984-4-25 | Sps Technologies, Llc |
AIC984-4-25P | Sps Technologies, Llc |