NSN 5305-01-183-5868
High Torque Screw
Between 1.164 inches and 1.184 inches fastener length, flat countersunk head style, between 0.704 inches and 0.762 inches head diameter, locking feature: detent ball grip.
Manufacturer part number AS292-6-10 for national stock number 5305011835868.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-183-5868.
-
MPN or Model
AS292-6-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.352 inches and 0.403 inches -
Fastener Length
Between 1.164 inches and 1.184 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.704 inches and 0.762 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.3737 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 0.625 inches and 0.641 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
43.0 rockwell c and 47.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.036 inches first hole and 1.056 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 4820-00-009-9006 MPN A51H10572Valve Seat
- 5940-00-052-9068 MPN GT11H-3BStud Terminal
- 1560-00-066-6183 MPN 123CS11505-3Rudder Tab Tip
- 1560-00-075-0783 MPN 123B10672-3Aircraft Fairing
- 1560-00-075-3730 MPN 123AM12040-5Link Assembly
- 1560-00-075-8227 MPN 128WP10031-4Hi Fairing Assembly
- 5935-00-088-8114 MPN GC800AP18-24SWElectrical Plug Connector
- 5985-00-111-6260 MPN GT817V1Electrical Dummy Load
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-183-5868 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AS292-6-10 | Avibank Mfg., Inc. |
GB510CG610 | Northrop Grumman Systems Corporation |