NSN 5305-01-183-5870
High Torque Screw
Between 0.949 inches and 0.979 inches fastener length, flat countersunk head style, between 0.297 inches and 0.302 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number HT4048-3D11 for national stock number 5305011835870.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-183-5870.
-
MPN or Model
HT4048-3D11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 0.949 inches and 0.979 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.297 inches and 0.302 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.075 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.826 inches first hole and 0.866 inches first hole -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-308-1553 MPN E723-160Socket Head Cap Screw
- 5305-00-354-5135 MPN HT4024L4-12Close Tolerance Screw
- 5305-01-004-9528 MPN ST3M557-3-3Close Tolerance Screw
- 5305-01-013-9600 MPN BM19031-7-29DClose Tolerance Screw
- 5305-01-013-9600 MPN BM19031-7-29DClose Tolerance Screw
- 5305-01-023-8192 MPN NAS1191-04T3BSocket Head Cap Screw
- 5305-01-050-9001 MPN C7984-3-9Close Tolerance Screw
- 5305-01-068-5467 MPN 755002A7643-1Externally Relieved Body Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-183-5870 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4048-3D11 | Huck International, Inc. |
HT4048-3D11 | Hi-shear Corporation |
HT4048-3D11 | Sps Technologies, Llc |
HT4048-3D11 | Alcoa Global Fasteners, Inc. |
ST3M713-3D11-1 | Boeing Company, The |
HT4048-3D11 | Lisi Aerospace Canada Corp |
11929-3D11 | Reid Products Inc. |
11929-3D11-1 | Reid Products Inc. |
HT4048-3D11 | Huck Intl Inc |
HT4048-3D11 | Sps Technologies, Llc |
ST3M713-3D11 | Boeing Company, The |