NSN 5305-01-183-6986
High Torque Screw
Between 2.000 inches and 2.030 inches fastener length, pan head style, between 0.838 inches and 0.863 inches head diameter, head height: between 0.286 inches and 0.304 inches .
Manufacturer part number NAS1137-25 for national stock number 5305011836986.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-183-6986.
-
MPN or Model
NAS1137-25
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.428 inches and 0.478 inches -
Fastener Length
Between 2.000 inches and 2.030 inches -
Head Style
Pan -
Head Diameter
Between 0.838 inches and 0.863 inches -
Head Height
Between 0.286 inches and 0.304 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.438 inches -
Grip Length
Between 1.552 inches and 1.572 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1137 professional/industrial association standard
More from these suppliers
- 5940-01-381-7134 MPN NAS1063B246-255Terminal Board Marker Strip
- 1560-01-623-1804 MPN 520-14948-2Aircraft Stringer
- 5940-01-384-3892 MPN NAS1063A8TB98TTerminal Board Marker Strip
- 5305-00-051-7329 MPN NAS1352-4H16Socket Head Cap Screw
- 5305-00-052-7449 MPN MS35198-97Machine Screw
- 5305-00-067-3863 MPN NAS1189-3P7LSocket Head Cap Screw
- 5305-00-067-5156 MPN MS21295-30Socket Head Cap Screw
- 5305-00-281-9669 MPN NAS335A27Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-183-6986 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1137-25 | National Aerospace Standards |