NSN 5305-01-183-8739
High Torque Screw
Retaining element in shank.
Manufacturer part number MS27577-4-37 for national stock number 5305011838739.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-183-8739.
-
MPN or Model
MS27577-4-37
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.283 inches and 0.334 inches -
Fastener Length
Between 2.731 inches and 2.751 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 2.312 inches and 2.328 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.631 inches first hole and 2.661 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 4130 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-004-2161 MPN MS27212-1-8Terminal Board
- 5905-00-027-0048 MPN MS20005H8Thermal Resistor
- 5935-00-103-7479 MPN MS27497REB24-61PElectrical Receptacle Connector
- 5935-00-134-0921 MPN MS3349-1Electrical Plug Connector
- 5935-00-164-0111 MPN MS27473T12B98PDElectrical Plug Connector
- 5935-00-204-6509 MPN MS3100E10SL3PElectrical Receptacle Connector
- 5940-00-204-8990 MPN MS25036-144Lug Terminal
- 5935-00-235-8970 MPN MS27488-16-3Electrical Connector End Seal Plug
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-183-8739 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS27577-4-37 | Military Standards |
Stock Check
- NS: 3
- NE: 422