NSN 5305-01-184-1980
High Torque Screw
Between 1.918 inches and 1.938 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, locking feature: detent ball grip.
Manufacturer part number AS292-4-24 for national stock number 5305011841980.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-184-1980.
-
MPN or Model
AS292-4-24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.277 inches and 0.328 inches -
Fastener Length
Between 1.918 inches and 1.938 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 1.500 inches and 1.516 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
43.0 rockwell c and 47.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.823 inches first hole and 1.843 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-003-6592 MPN A51B24625-12Leading Edge Fitting
- 1560-00-004-3072 MPN A51B35000-6Horizontal Stabilizer
- 5935-00-005-0245 MPN A51P9042-21Electrical Plug Connector
- 4820-00-022-3326 MPN A51E9131-1Hot Air Modulating Valve
- 1560-00-092-5909 MPN 123CS11805-503Rudder Trim Tab
- 4920-00-108-8566 MPN A51S39580-1Element Dummy
- 5985-00-115-2989 MPN 128SCAV475-1Waveguide Assembly
- 5935-00-125-2449 MPN GK802C3Electrical Connector Polarizing Key
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-184-1980 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AS292-4-24 | Avibank Mfg., Inc. |
GB510CG424 | Northrop Grumman Systems Corporation |