NSN 5305-01-184-1985
High Torque Screw
Between 1.138 inches and 1.168 inches fastener length, flat countersunk head style, between 0.350 inches and 0.399 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number NAS1581V4T12 for national stock number 5305011841985.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-184-1985.
-
MPN or Model
NAS1581V4T12
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.378 inches and 0.428 inches -
Fastener Length
Between 1.138 inches and 1.168 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.350 inches and 0.399 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy -
Material Specification
Ams4967, com+6al-4v assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5940-01-303-7067 MPN NAS1747-11Conductor Splice
- 5305-00-007-0287 MPN NAS1131C88PClose Tolerance Screw
- 5305-00-057-0515 MPN MS51958-18Machine Screw
- 5305-00-082-6780 MPN MS27039-1-12Machine Screw
- 5305-00-119-7448 MPN NAS1635-08LL16Socket Head Cap Screw
- 5305-00-164-1363 MPN NAS2810-22Close Tolerance Screw
- 5305-00-193-5240 MPN NAS1741C3R8USocket Head Cap Screw
- 5305-00-225-9443 MPN MS16996-32Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-184-1985 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581V4T12 | National Aerospace Standards |