NSN 5305-01-184-7699
High Torque Screw
Between 1.730 inches and 1.750 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, locking feature: detent ball grip.
Manufacturer part number AS292-4-21 for national stock number 5305011847699.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-184-7699.
-
MPN or Model
AS292-4-21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.277 inches and 0.328 inches -
Fastener Length
Between 1.730 inches and 1.750 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 1.312 inches and 1.328 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
43.0 rockwell c and 47.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.635 inches first hole and 1.655 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-510-5300 MPN LS15263V4-18Machine Screw
- 5305-01-055-1147 MPN BACB30LU6-13Close Tolerance Screw
- 5305-01-076-4930 MPN HT4020-4-9AXShoulder Screw
- 5305-01-143-1756 MPN HT4011-7-12Shoulder Screw
- 5305-01-259-4062 MPN HT4025L4D22Close Tolerance Screw
- 5305-01-435-0098 MPN BACB30LU14-11YClose Tolerance Screw
- 5305-01-435-5961 MPN BACB30LU7-53Close Tolerance Screw
- 5305-01-462-2693 MPN HT4075D6-14-51Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
![Mechanic Bill explains High Torque Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-01-184-7699 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AS292-4-21 | Avibank Mfg., Inc. |
GB510CG421 | Northrop Grumman Systems Corporation |
GB510CG421 | Arconic Global Fasteners & Rings, |
GB510CG421 | Sps Technologies, Llc |
GB510CG421 | Avibank Mfg., Inc. |
GB510CG421 | Abounding Security Inc |
Stock Check
![](/public/images/partscage_shelf3.png)