NSN 5305-01-185-2597
High Torque Screw
Between 1.043 inches and 1.063 inches fastener length, crowned hexagon head style, between 0.126 inches and 0.141 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number MS3369B410 for national stock number 5305011852597.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-185-2597.
-
MPN or Model
MS3369B410
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.277 inches and 0.328 inches -
Fastener Length
Between 1.043 inches and 1.063 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
Between 0.625 inches and 0.641 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
63000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.948 inches first hole and 0.968 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-256-6718 MPN 2637505PC30Shoulder Screw
- 5305-01-067-7026 MPN CA2896-12SKPanel Screw Assembly
- 5305-01-079-6570 MPN CA2440-3-10PPanel Screw Assembly
- 5305-01-170-3824 MPN CA21062-08-6-16Close Tolerance Screw
- 5306-00-408-6864 MPN CA4510-4-19Close Tolerance Bolt
- 1680-01-501-1699 MPN NAS1360C2C33FMateri Aircraft Pin
- 1560-01-623-0453 MPN 520-14944-5Aircraft Stringer
- 5305-00-008-5914 MPN NAS1100C06-28Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-185-2597 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS3369B410 | National Aerospace Standards |
CA2658-4-10 | Arconic Global Fasteners & Rings, |
AS169-4-10 | Avibank Mfg., Inc. |
MS3369-410 | Military Standards |
MS3369B410 | Military Standards |