NSN 5305-01-185-3596
High Torque Screw
0.522 inches fastener length, flat countersunk head style, between 0.266 inches and 0.303 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number LD111-0047-0402 for national stock number 5305011853596.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-185-3596.
-
MPN or Model
LD111-0047-0402
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.397 inches -
Fastener Length
0.522 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.266 inches and 0.303 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
0.125 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-032-3403 MPN 151-14273-1L Retainer Assembly
- 1560-00-250-2726 MPN 165-31876Small Arms-fragmentation Protective Supplemental Armor
- 1680-00-329-7406 MPN 165-54545-1Cable Assy And Plat
- 4920-00-330-4185 MPN T1128Surfac Fixture Assy
- 1560-00-732-9831 MPN 265-170010-3Aircraft Structural Component Bracket
- 1680-01-164-0382 MPN LE162-0039-3202Push Pull Rod Assembly
- 4920-01-171-2077 MPN R-TBD-693Aircraft Maintenance Fixture
- 1560-01-173-8641 MPN L1700008-006Aircraft Structural Component Bracket
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-185-3596 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0047-0402 | Boeing Company, The |
LD111-0032-0402 | Boeing Company, The |