NSN 5305-01-185-7162
High Torque Screw
Between 0.566 inches and 0.596 inches fastener length, flat countersunk head style, between 0.339 inches and 0.381 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number LD111-0044-2304 for national stock number 5305011857162.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-185-7162.
-
MPN or Model
LD111-0044-2304
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.4 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.331 inches -
Fastener Length
Between 0.566 inches and 0.596 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
0.250 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 661 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-680-5889 MPN BACB30LU-4D-35Machine Screw
- 5305-01-125-1205 MPN LS15266V4-19Close Tolerance Screw
- 5305-01-206-7205 MPN BACS12CK3U18Machine Screw
- 5305-01-512-8411 MPN 3M1170D3-5AFClose Tolerance Screw
- 5306-00-357-1829 MPN VAL23029-7D24Close Tolerance Bolt
- 5306-00-616-6156 MPN 3M33-3-10AMachine Bolt
- 5306-00-904-4149 MPN MS21250-10018Shear Bolt
- 5306-01-043-5730 MPN GB511BG6-7Close Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-185-7162 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0044-2304 | Boeing Company, The |
LD111-0044-2304 | Sps Technologies, Llc |
LD111-0044-2304 | Flanagan Brothers, Inc. |
LD111-0044-2304 | Sps Technologies, Llc |
LD111-0044-2304 | Sps Technologies, Llc |
LD111-0044-2304 | Sonic Industries Inc. |
LD111-0044-2304 | Hi-shear Corporation |
LD111-0044-2304 | Lisi Aerospace Canada Corp |
LD111-0044-2304 | Arconic Global Fasteners & Rings, |
LD111-0044-2304 | Sps Technologies, Llc |
LD111-0044-2304 | Valley-todeco, Inc. |