NSN 5305-01-185-8049
High Torque Screw
Groove in bearing surface of head.
Manufacturer part number AIC1023H8-22 for national stock number 5305011858049.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-185-8049.
-
MPN or Model
AIC1023H8-22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.608 inches and 0.658 inches -
Fastener Length
Between 1.993 inches and 2.023 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.826 inches and 0.853 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.500 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
60.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6485 assn standard single material response -
Surface Treatment
Nickel and cadmium -
Surface Treatment Specification
Ams 2416 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-007-6213 MPN A1C617-2Externally Relieved Body Screw
- 5305-00-080-9291 MPN 3MA333FA7Machine Screw
- 5305-00-929-4089 MPN NAS1101C04-3Machine Screw
- 5305-01-038-9555 MPN BACB30LH3-5Close Tolerance Screw
- 5305-01-054-5421 MPN AIC985-4-15PClose Tolerance Screw
- 5305-01-056-5451 MPN BACB30LK3-8Close Tolerance Screw
- 5305-01-069-2728 MPN NAS1101E3-12Machine Screw
- 5305-01-123-8456 MPN AIC812-08-9Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-185-8049 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC1023H8-22 | Sps Technologies, Llc |
VT1039H8-22 | Arconic Global Fasteners & Rings, |
HR101H8-22 | Hi-shear Corporation |
64040H8-22 | Sps Technologies, Llc |
VT1039H8-22 | Alcoa Global Fasteners, Inc. |
CS318642H8-22 | Textron Fastening Systems |
HR101H8-22 | Lisi Aerospace Canada Corp |
C387H8-22 | Lockheed Martin Corporation |
64040H8-22 | Sps Technologies, Llc |