NSN 5305-01-185-8422
Panel Screw
Between 0.480 inches and 0.520 inches fastener length, flat chamfer head style, between 0.221 inches and 0.231 inches head diameter, head height: between 0.133 inches and 0.143 inches .
Manufacturer part number 6930876-1 for national stock number 5305011858422.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-185-8422.
-
MPN or Model
6930876-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.230 inches and 0.270 inches -
Fastener Length
Between 0.480 inches and 0.520 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.221 inches and 0.231 inches -
Head Height
Between 0.133 inches and 0.143 inches -
First Diameter From Head
Between 0.095 inches and 0.098 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
Between 0.230 inches and 0.270 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.138 inches -
Width Across Flats
Between 0.105 inches and 0.115 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
80000 pounds per square inch -
Hardness Rating
80.0 rockwell c -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 316 -
Material Specification
66 federal standard all material responses -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-201-9743 MPN 6013443Electrical Receptacle Connector
- 5950-00-852-2634 MPN 6052657Power Transformer
- 5935-01-168-5939 MPN 6133969-1Plug Dummy Connector
- 1680-01-543-4247 MPN 160D145315-9Electrical-electronic Equipment Control Panel
- 5905-01-630-0602 MPN R0805F3402JFilm Fixed Resistor
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-185-8422 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
6930876-1 | Lockheed Martin Corporation |