NSN 5305-01-186-3091
High Torque Screw
Between 1.793 inches and 1.813 inches fastener length, flat chamfer head style, between 0.477 inches and 0.492 inches head diameter, head height: between 0.126 inches and 0.141 inches .
Manufacturer part number MS21125B422 for national stock number 5305011863091.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-186-3091.
-
MPN or Model
MS21125B422
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.277 inches and 0.328 inches -
Fastener Length
Between 1.793 inches and 1.813 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.477 inches and 0.492 inches -
Head Height
Between 0.126 inches and 0.141 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
Between 1.375 inches and 1.391 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
63000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.698 inches first hole and 1.718 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp xm-13 fastener -
Material Specification
Ams5678 assn standard 1st material response spring or astm a580 cond. A assn standard 2nd material response spring -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-391-1828 MPN NAS1063B46-50Terminal Board Marker Strip
- 5940-01-455-2466 MPN NAS1063A20-500BATerminal Board Marker Strip
- 5940-01-660-0089 MPN NAS1063A2-536JTerminal Board Marker Strip
- 5305-00-008-7878 MPN NAS1190E02T10LSocket Head Cap Screw
- 5305-00-038-6684 MPN NAS1581F3H8TClose Tolerance Screw
- 5305-00-066-8681 MPN NAS1081C6A16Setscrew
- 5305-00-137-3042 MPN MS51861-41CTapping Screw
- 5305-00-164-6935 MPN NAS1623E44Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-186-3091 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21125B422 | National Aerospace Standards |
MS21125B422 | Military Standards |