NSN 5305-01-186-3094
High Torque Screw
Between 2.981 inches and 3.001 inches fastener length, crowned hexagon head style, between 0.126 inches and 0.141 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number NASM3369B441 for national stock number 5305011863094.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-186-3094.
-
MPN or Model
NASM3369B441
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.278 inches and 0.329 inches -
Fastener Length
Between 2.981 inches and 3.001 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
Between 2.562 inches and 2.578 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
63000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.885 inches first hole and 2.905 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-062-2943 MPN GC800A-C18-20SElectrical Plug Connector
- 1560-00-070-5939 MPN 128CS10012-8Wing Dive Brake Flap
- 1560-00-075-3706 MPN 123AMM11614-1Block Assembly
- 1560-00-123-8968 MPN 123PM11407-501Aircraft Structural Component Support
- 1560-00-133-6110 MPN 134CSM10127-3Aileron Sto Fitting
- 1560-00-153-0939 MPN G373Selector Handle Assembly
- 5985-00-171-2378 MPN 123SCAV5697-1Waveguide Assembly
- 1560-00-320-5653 MPN 121SB10087-3Barrier Hook Assy
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-186-3094 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NASM3369B441 | Military Standards |
MS3369B441 | Military Standards |
GB511AE4-41 | Northrop Grumman Systems Corporation |
CA2630-04-41 | Arconic Global Fasteners & Rings, |
CA2630-0438 | Arconic Global Fasteners & Rings, |
AS108-04-41 | Avibank Mfg., Inc. |
VP1119-4-41 | Alcoa Global Fasteners, Inc. |