NSN 5305-01-186-4552
High Torque Screw
3 keyways 0.380 in. Min. And 0.410 in. Max long,0.040 in. Min and 0.044 in. Max wide machined in shank,bore machined in thread end to receive plug.
Manufacturer part number CA2193-4-16 for national stock number 5305011864552.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-186-4552.
-
MPN or Model
CA2193-4-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.516 inches and 0.556 inches -
Fastener Length
Between 1.526 inches and 1.546 inches -
Head Style
Flat countersunk -
Head Diameter
0.508 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.250 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Width Across Flats
Between 0.1565 inches and 0.1587 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-500-0982 MPN CA4520-5-12Close Tolerance Screw
- 5305-01-287-5776 MPN CA21062-06-10-24Machine Screw
- 5305-01-432-0412 MPN CA21062-08-4-11Close Tolerance Screw
- 5306-01-055-9093 MPN CA21037-4-2HSInternal Wrenching Bolt
- 1560-00-035-3881 MPN 180-34314Aircraft Structural Component Support
- 1560-00-131-7783 MPN 36-33542Landing Gear L Bolt
- 5975-00-156-3253 MPN LE127-0011-0002Electrical Components Tiedown Strap
- 1560-00-533-2220 MPN 88-51033Airspeed Tube Assy
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-186-4552 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA2193-4-16 | Arconic Global Fasteners & Rings, |
FIT01-0002-4016 | Fastener Innovation Technology, Inc. |
LE111-0002-4016 | Boeing Company, The |