NSN 5305-01-186-7146
High Torque Screw
Between 1.200 inches and 1.230 inches fastener length, flat countersunk head style, between 0.350 inches and 0.399 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number NAS1581K4T13 for national stock number 5305011867146.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-186-7146.
-
MPN or Model
NAS1581K4T13
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.378 inches and 0.428 inches -
Fastener Length
Between 1.200 inches and 1.230 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.350 inches and 0.399 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy -
Material Specification
Ams4967, comp 6al-4v assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1581 professional/industrial association standard
More from these suppliers
- 5940-01-010-1572 MPN NAS1745-16Conductor Splice
- 5940-01-425-7407 MPN NAS1063C10-304Terminal Board Marker Strip
- 1680-01-532-3063 MPN NAS77A6-023NAirc Sleeve Bushing
- 5305-00-003-8162 MPN NAS1352-6-44PSocket Head Cap Screw
- 5305-00-007-6172 MPN NAS1100C00-4Machine Screw
- 5305-00-052-7391 MPN MS24627-1Tapping Screw
- 5305-00-053-1075 MPN MS35199-29Machine Screw
- 5305-00-059-2488 MPN MS51976-44Setscrew
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-186-7146 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581K4T13 | National Aerospace Standards |
NAS1581V4T13 | National Aerospace Standards |