1-321-802-5889
Email Us

NSN 5305-01-187-0147

High Torque Screw

About this product

Between 1.293 inches and 1.313 inches fastener length, crowned hexagon head style, between 0.126 inches and 0.141 inches head height, width between flats: between 0.430 inches and 0.439 inches .

Manufacturer part number MS3369B414 for national stock number 5305011870147.

Datasheet

  • Product description

    Close Tolerance Screw NSN 5305-01-187-0147.

  • MPN or Model

    MS3369B414

  • Schedule B
    7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment)
  • NMF (National Motor Freight)
    093486 - Bolts, Nuts Or Screws, NOI (sub 3)
  • Unit Weight (Est.)
    0.1 lb
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    Between 0.277 inches and 0.328 inches
  • Fastener Length
    Between 1.293 inches and 1.313 inches
  • Head Style
    Crowned hexagon
  • Head Height
    Between 0.126 inches and 0.141 inches
  • Width Between Flats
    Between 0.430 inches and 0.439 inches
  • Locking Feature
    Detent ball grip
  • Grip Diameter
    Between 0.2487 inches and 0.2492 inches
  • Shank Unthreaded Hole Diameter
    0.076 inches first hole and 0.086 inches first hole
  • Internal Drive Style
    Slot
  • Thread Diameter
    0.250 inches
  • Grip Length
    Between 0.875 inches and 0.891 inches
  • Thready Qty Per Inch (tpi)
    28
  • Min. Tensile Strength (psi)
    63000 pounds per square inch
  • Distance From Head Largest Bearing Surface To Shank Hole Center
    1.198 inches first hole and 1.218 inches first hole
  • Surface Finish
    32.0 microinches grip
  • Material
    Steel comp xm-13
  • Material Specification
    Ams5629 assn standard single material response
  • Surface Treatment
    Passivate
  • Surface Treatment Specification
    Qq-p-35 federal specification single treatment response
  • Thread Series Designator
    Unjf
More from these suppliers
Close Tolerance Screw

A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Mechanic Bill explains High Torque Screw

Pricing and Availability

Get a quote for 5305-01-187-0147 close tolerance screw
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5305011870147

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
MS3369B414 Military Standards
Stock Check
Availability for this item was last checked on 06/17/21. The quantities and conditions available at the time were:
  • NE: 2
  • NS: 1