NSN 5305-01-188-1141
High Torque Screw
Between 0.534 inches and 0.564 inches fastener length, flat countersunk head style, between 0.339 inches and 0.381 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS1580C3H3 for national stock number 5305011881141.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-188-1141.
-
MPN or Model
NAS1580C3H3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.337 inches and 0.387 inches -
Fastener Length
Between 0.534 inches and 0.564 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.177 inches and 0.197 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 assn standard single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5940-01-425-7394 MPN NAS1063A11-322Terminal Board Marker Strip
- 5935-01-661-3034 MPN ES962VTElectrical Modular Receptacle Connector
- 5305-00-007-2953 MPN NAS1743C02T12USocket Head Cap Screw
- 5305-00-035-5385 MPN NAS1581A3H6TClose Tolerance Screw
- 5305-00-050-9221 MPN MS24667-41Socket Head Cap Screw
- 5305-00-150-3583 MPN MS27039-8-12Machine Screw
- 5305-00-208-6174 MPN MS24678-45CSocket Head Cap Screw
- 5305-00-420-8247 MPN NAS1631-2Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-188-1141 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580C3H3 | National Aerospace Standards |