NSN 5305-01-189-3779
High Torque Screw
Retaining element on shank.
Manufacturer part number MS27577-4-32 for national stock number 5305011893779.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-189-3779.
-
MPN or Model
MS27577-4-32
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.282 inches and 0.333 inches -
Fastener Length
Between 2.418 inches and 2.438 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 2.000 inches and 2.016 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.318 inches first hole and 2.348 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 4130 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-088-8715 MPN MS3114F14-12PElectrical Receptacle Connector
- 5935-00-173-4985 MPN MS18160-2VElectrical Receptacle Connector
- 4820-00-181-8819 MPN MS28771-16Check Valve
- 5935-00-201-0686 MPN MS27484E16B35SElectrical Plug Connector
- 5935-00-201-8036 MPN MS3102A20-7PXElectrical Receptacle Connector
- 5935-00-221-9280 MPN MS3102A22-1SElectrical Receptacle Connector
- 5935-00-253-0141 MPN MS3119E12-10WConnector Adapter
- 5945-00-257-0316 MPN MS24172-D1Electromagnetic Relay
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-189-3779 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS27577-4-32 | Military Standards |