NSN 5305-01-189-4073
High Torque Screw
0.688 inches fastener length, pan no. 2 head style, between 0.594 inches and 0.614 inches head diameter, head height: between 0.162 inches and 0.183 inches .
Manufacturer part number NAS5205-U4 for national stock number 5305011894073.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-189-4073.
-
MPN or Model
NAS5205-U4
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.438 inches -
Fastener Length
0.688 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.594 inches and 0.614 inches -
Head Height
Between 0.162 inches and 0.183 inches -
Grip Diameter
Between 0.3106 inches and 0.3112 inches -
Internal Drive Style
Tri-wing recess -
Thread Diameter
0.3125 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Titanium alloy uns r54520 -
Material Specification
Ams 4928 assn standard single material response or ams 4967 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-323-4638 MPN MS33686-22-2PElectrical Connector Insert
- 5940-01-435-9716 MPN NAS1063A5-TB199HTerminal Board Marker Strip
- 5940-01-447-2950 MPN NAS1063C3-504BETerminal Board Marker Strip
- 5305-00-052-6917 MPN MS24629-50Tapping Screw
- 5305-00-058-4022 MPN MS24694S124Machine Screw
- 5305-00-135-1085 MPN NAS1190-06P8LSocket Head Cap Screw
- 5305-00-145-0752 MPN NAS1101E0H38Machine Screw
- 5305-00-186-9211 MPN NAS1704-26Shoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-189-4073 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS5205-U4 | National Aerospace Standards |