NSN 5305-01-189-7400
Panel Screw
Color black.
Manufacturer part number 136549-2 for national stock number 5305011897400.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-189-7400.
-
MPN or Model
136549-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.150 inches -
Fastener Length
0.580 inches -
Head Style
Flat countersunk undercut -
Head Diameter
0.332 inches -
Head Height
0.072 inches -
First Diameter From Head
0.120 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.358 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.164 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
80000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 316 -
Material Specification
66 federal standard all material responses -
Surface Treatment
Oxide -
Surface Treatment Specification
Mil-c-13924, class 2 military specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5905-00-140-9080 MPN 235058-10Composition Fixed Resistor
- 5940-00-688-8743 MPN 205019-34Lug Terminal
- 5935-00-811-8293 MPN 190143Connector Adapter
- 5945-00-824-9640 MPN 165014-1Electromagnetic Relay
- 5950-01-453-3002 MPN 366182-516Radio Frequency Coil
- 5905-01-467-6123 MPN 235186-318Film Fixed Resistor
- 5935-01-432-1719 MPN 186189-1Electrical Receptacle Connector
- 5935-01-281-7512 MPN 186072-1Electrical Receptacle Connector
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-189-7400 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
136549-2 | Raytheon Company |