NSN 5305-01-191-0404
High Torque Screw
Drive ribbed.
Manufacturer part number 106706T-3-A19 for national stock number 5305011910404.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-191-0404.
-
MPN or Model
106706T-3-A19
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.386 inches and 0.453 inches -
Fastener Length
Between 1.584 inches and 1.631 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 1.178 inches and 1.198 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium or cadmium and chromate -
Surface Treatment Specification
Nas672 assn standard 1st treatment response or mil-c-8837, ty2, cl2 military specification 2nd treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-061-5496 MPN HT8043-6-13Close Tolerance Screw
- 5305-01-043-5749 MPN HT8100-4-10Close Tolerance Screw
- 5305-01-129-7598 MPN HT8140-7-14Close Tolerance Screw
- 5305-01-159-4487 MPN 3M933-4-14Machine Screw
- 5305-01-435-6306 MPN BACB30LU9-19Close Tolerance Screw
- 5305-01-481-9414 MPN TX1027D5-18AClose Tolerance Screw
- 5305-01-502-6995 MPN TX1026C3-7AClose Tolerance Screw
- 5306-00-205-3700 MPN BACB30NE6H18Close Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-191-0404 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106706T-3-A19 | Sps Technologies, Llc |
SC1779-4-19 | Arconic Global Fasteners & Rings, |
PBF1202-4-19 | Sps Technologies, Llc |
HR204-4-19 | Hi-shear Corporation |
106706T-4-19 | Sps Technologies, Llc |
HR204-4-19 | Lisi Aerospace Canada Corp |
GB510CE4-19 | Northrop Grumman Systems Corporation |