1-321-802-5889
Email Us

NSN 5305-01-191-2464

High Torque Screw

About this product

Internal drive ribbed.

Manufacturer part number MATF111A08-4 for national stock number 5305011912464.

Datasheet

  • Product description

    Close Tolerance Screw NSN 5305-01-191-2464.

  • MPN or Model

    MATF111A08-4

  • Schedule B
    7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment)
  • NMF (National Motor Freight)
    093486 - Bolts, Nuts Or Screws, NOI (sub 3)
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    Between 0.314 inches and 0.364 inches
  • Fastener Length
    Between 0.574 inches and 0.604 inches
  • Head Style
    Flat countersunk
  • Head Diameter
    Between 0.294 inches and 0.332 inches
  • Grip Diameter
    Between 0.1610 inches and 0.1635 inches
  • Internal Drive Style
    Offset cruciform (torque set)
  • Thread Diameter
    0.164 inches
  • Grip Length
    Between 0.240 inches and 0.260 inches
  • Thready Qty Per Inch (tpi)
    32
  • Min. Tensile Strength (psi)
    160000 pounds per square inch
  • Hardness Rating
    36.0 rockwell c and 40.0 rockwell c
  • Countersink Angle
    Between 99.0 degrees and 101.0 degrees
  • Part Name Assigned By Controlling Agency
    Navy special project
  • Material
    Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150
  • Surface Treatment
    Cadmium and chromate
  • Surface Treatment Specification
    Qq-p-416, type 2, cl 2 federal specification single treatment response
  • Thread Series Designator
    Unjc
More from these suppliers
Close Tolerance Screw

A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Mechanic Bill explains High Torque Screw

Pricing and Availability

Get a quote for 5305-01-191-2464 close tolerance screw
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5305011912464

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
MATF111A08-4 Abounding Security Inc
PBF1356A08-4 Sps Technologies, Llc
SC1777-06-3 Arconic Global Fasteners & Rings,
PBF1356-08-4 Sps Technologies, Llc
HR216-08-4 Hi-shear Corporation
122967-06-3 Sps Technologies, Llc
HR216-08-4 Lisi Aerospace Canada Corp
GB510CH08-4 Northrop Grumman Systems Corporation
MATF111-08-4 Abounding Security Inc
HR216-08-4 Naval Inventory Control Point
122967-06-3 Sps Technologies, Llc
Stock Check
Availability of this NSN has not been updated recently. Submit the pricing and availbility form above to receive an up to date quote.