NSN 5305-01-191-2468
High Torque Screw
Drive ribbed.
Manufacturer part number SC1779-6-15 for national stock number 5305011912468.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-191-2468.
-
MPN or Model
SC1779-6-15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.534 inches and 0.601 inches -
Fastener Length
Between 1.482 inches and 1.529 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.717 inches and 0.760 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 0.928 inches and 0.948 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium or cadmium and chromate -
Surface Treatment Specification
Nas672 assn standard 1st treatment response or mil-c-8837, ty2, cl2 military specification 2nd treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-354-4510 MPN CHT4024-3-7Close Tolerance Screw
- 5305-00-899-4623 MPN BACS12BW06P12Socket Head Cap Screw
- 5305-01-013-9598 MPN HT8177-7D19Close Tolerance Screw
- 5305-01-025-6962 MPN HT4049-4D15Close Tolerance Screw
- 5305-01-110-9770 MPN HT4067-3-9AClose Tolerance Screw
- 5305-01-126-4721 MPN HT4049-7D49Close Tolerance Screw
- 5305-01-144-0986 MPN HT4020-7-24AXShoulder Screw
- 5305-01-194-9197 MPN HT4058-3-5AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-191-2468 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SC1779-6-15 | Arconic Global Fasteners & Rings, |
PBF1202-6-15 | Sps Technologies, Llc |
HR204-6-15 | Hi-shear Corporation |
106706T-6-15 | Sps Technologies, Llc |
HR204-6-15 | Lisi Aerospace Canada Corp |
GB510CE6-15 | Northrop Grumman Systems Corporation |