NSN 5305-01-191-3124
High Torque Screw
Between 1.266 inches and 1.296 inches fastener length, fillister countersunk head style, between 0.390 inches and 0.395 inches head diameter, head height: between 0.070 inches and 0.074 inches .
Manufacturer part number HT40543-4-13 for national stock number 5305011913124.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-191-3124.
-
MPN or Model
HT40543-4-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.444 inches and 0.494 inches -
Fastener Length
Between 1.266 inches and 1.296 inches -
Head Style
Fillister countersunk -
Head Diameter
Between 0.390 inches and 0.395 inches -
Head Height
Between 0.070 inches and 0.074 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 8740 -
Material Specification
Mil-s-6049 military specification single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Mil-c-83488, type 2, cl3 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-338-3211 MPN HT1029A3-7Close Tolerance Screw
- 5305-00-354-4605 MPN CHT4024-3-9Close Tolerance Screw
- 5305-00-487-5277 MPN C3874H4-9Close Tolerance Screw
- 5305-00-928-2348 MPN C079-4-10Machine Screw
- 5305-01-158-5371 MPN SC2163-3-9Machine Screw
- 5305-01-303-5637 MPN SC1823-3-4Close Tolerance Screw
- 5305-01-359-2509 MPN GB511DU06-52Machine Screw
- 5305-01-417-2497 MPN TX1027D4-16AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
![Mechanic Bill explains High Torque Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-01-191-3124 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT40543-4-13 | Huck International, Inc. |
HT4053-4-13 | Arconic Global Fasteners & Rings, |
HT4053-4-13 | Hi-shear Corporation |
HT4053-4-13 | Sps Technologies, Llc |
HT4053-4-13 | Lisi Aerospace Canada Corp |
HT40543-4-13 | Deutsch Fastener Corp |
HT40543-4-13 | Huck Intl Inc |
10113389 | Nimikkeistokeskus Ncb Finland |
HT4053-4-13 | Alcoa Global Fasteners, Inc. |
Stock Check
![](/public/images/partscage_shelf3.png)