NSN 5305-01-191-4596
High Torque Screw
Between 1.536 inches and 1.566 inches fastener length, flat countersunk head style, between 0.339 inches and 0.381 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number NAS1580C3T19 for national stock number 5305011914596.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-191-4596.
-
MPN or Model
NAS1580C3T19
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.338 inches and 0.388 inches -
Fastener Length
Between 1.536 inches and 1.566 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 1.178 inches and 1.198 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5732 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5935-01-108-1815 MPN MS3476L16-26PNElectrical Plug Connector
- 5940-01-384-3975 MPN NAS1063B3-3Terminal Board Marker Strip
- 5305-00-050-9218 MPN MS24678-51CSocket Head Cap Screw
- 5305-00-068-5838 MPN NASM24678Socket Head Cap Screw
- 5305-00-151-9785 MPN NAS1121-7Close Tolerance Screw
- 5305-00-186-9546 MPN NAS1351C06H5Socket Head Cap Screw
- 5305-00-225-8476 MPN MS24693-S144Machine Screw
- 5305-00-225-8507 MPN MS90725-43Hexagon Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-191-4596 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580C3T19 | National Aerospace Standards |