NSN 5305-01-191-6268
Bolt Stove
Concentric hole 0.1596 in. Min dia,0.1675 in. Max dia,0.10 in. Thd dia 32 thds per in.,countersunk 90 degrees 0.156 in. Min dia,0.187 in. Max dia 0.353 in. Min; 0.425 in. Max length.
Manufacturer part number 123WM10111-611 for national stock number 5305011916268.
Datasheet
-
Product description
Machine Screw NSN 5305-01-191-6268.
-
MPN or Model
123WM10111-611
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.402 inches -
Fastener Length
Between 0.987 inches and 1.017 inches -
Head Style
Flat countersunk undercut -
Head Diameter
0.531 inches -
Head Height
Between 0.057 inches and 0.059 inches -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Part Name Assigned By Controlling Agency
Navy special project -
Screw Material
Steel -
Screw Surface Treatment
Cadmium and chromate -
Screw Surface Treatment Specification
Qq-p-416 type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-066-6186 MPN 123CSP10033-4Rudde Skin Assembly
- 1560-00-075-0723 MPN 123CM12241-2ACentering Cam
- 1560-00-075-3730 MPN 123AM12040-5Link Assembly
- 1560-00-107-9014 MPN 123WP10026-2Jury Boot Assembly
- 1560-00-169-0581 MPN 123EC10024-1Duct Assy
- 1680-00-185-9311 MPN 1128ABP40008-15Glare Shield
- 5975-00-231-0218 MPN GA800MF4Electrical Conduit Wye
- 1560-00-272-3051 MPN A51P60468-15Air Cross Bleed Duct
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-191-6268 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
123WM10111-611 | Northrop Grumman Systems Corporation |
123WM10111-611 | Northrop Grumman Systems Corporation |
123WM10111-611 | Northrop Grumman Systems Corporation |