NSN 5305-01-191-6270
Bolt Stove
Fconcentric hole in head 0.1596 in. Min,0.1675 in. Max dia; 0.190 in. Thd dia,32 threads per in. Jf,class 3b; countersunk 90 degrees,0.156 in. Min 0.187 in max dia; 0.435 in. Min,0.600 in. Max length.
Manufacturer part number 123WM10111-617 for national stock number 5305011916270.
Datasheet
-
Product description
Machine Screw NSN 5305-01-191-6270.
-
MPN or Model
123WM10111-617
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.312 inches -
Fastener Length
Between 0.897 inches and 0.927 inches -
Head Style
Flat countersunk undercut -
Head Diameter
0.531 inches -
Head Height
Between 0.057 inches and 0.059 inches -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Part Name Assigned By Controlling Agency
Navy special project -
Screw Material
Steel -
Screw Surface Treatment
Chromate and cadmium -
Screw Surface Treatment Specification
Qq-p-416 type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-075-8219 MPN 128CM12042-5Control Crank Assembly
- 1560-00-098-0976 MPN 89WM2105-1Aircraft Structural Component Support
- 5985-00-240-7419 MPN GA800CV2Waveguide Adapter
- 5975-00-263-1100 MPN GF803P10Conduit Chase Nipple
- 5975-00-284-6974 MPN GF803P3Conduit Chase Nipple
- 1560-00-304-9853 MPN 37E52560-2-1Maneuv Tip Assembly
- 1560-00-305-1580 MPN 88575-25Cowling Spinning Assembly
- 1560-00-334-5969 MPN 93796Door Bumper Main Entrance Plate
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-191-6270 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
123WM10111-617 | Northrop Grumman Systems Corporation |
123WM10111-617 | Northrop Grumman Systems Corporation |
123WM10111-617 | Northrop Grumman Systems Corporation |