NSN 5305-01-192-5752
High Torque Screw
Internal drive ribbed.
Manufacturer part number SC1779-4-9 for national stock number 5305011925752.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-192-5752.
-
MPN or Model
SC1779-4-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.386 inches and 0.453 inches -
Fastener Length
Between 0.958 inches and 1.005 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium or cadmium and chromate -
Surface Treatment Specification
Nas 672 assn standard 1st treatment response or mil-c-8837, type 2, cl 2 military specification 2nd treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-551-4843 MPN HT4025L4-13Close Tolerance Screw
- 5305-00-613-8274 MPN HT4028L4-24Close Tolerance Screw
- 5305-01-056-4220 MPN C7986-10-52Close Tolerance Screw
- 5305-01-076-4945 MPN SC1810-3-3Close Tolerance Screw
- 5305-01-082-2029 MPN CVC241AC4-9Machine Screw
- 5305-01-097-7911 MPN HT4009-3-15Shoulder Screw
- 5305-01-097-8221 MPN CHT4067-4-9AClose Tolerance Screw
- 5305-01-156-5118 MPN ST3M733-6L16Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-192-5752 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SC1779-4-9 | Arconic Global Fasteners & Rings, |
PBF1202-4-9 | Sps Technologies, Llc |
HR204-4-9 | Hi-shear Corporation |
106706T-4-A9 | Sps Technologies, Llc |
HR204-4-9 | Lisi Aerospace Canada Corp |
GB510CE4-9 | Northrop Grumman Systems Corporation |