NSN 5305-01-192-6386
High Torque Screw
Internal drive ribbed.
Manufacturer part number AS292-4-16 for national stock number 5305011926386.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-192-6386.
-
MPN or Model
AS292-4-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.277 inches and 0.328 inches -
Fastener Length
Between 1.418 inches and 1.438 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 1.000 inches and 1.016 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
63000 pounds per square inch -
Hardness Rating
43.0 rockwell c and 47.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.323 inches first hole and 1.343 inches first hole -
Surface Finish
32.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-062-1142 MPN GC800A20-19SXElectrical Plug Connector
- 1560-00-075-3694 MPN 123AM11518-1Sector Assembly
- 1560-00-165-5232 MPN 87471RAircraft Structural Component Support
- 5935-00-187-2028 MPN GA800AH16Electr Solderless Contact Sleeve
- 5935-00-202-0045 MPN GC860EF158P1-2Electrical Connector Cover
- 5985-00-451-8708 MPN 1128SCAV631-3Waveguide Assembly
- 1560-00-560-4987 MPN 37F64096-1Power Control Stop
- 1680-00-566-1928 MPN 92178Waste Pa Receptacle
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-192-6386 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AS292-4-16 | Avibank Mfg., Inc. |
GB510CG416 | Northrop Grumman Systems Corporation |
AS292-4-16 | Avibank Mfg., Inc. |
GB510CG416 | Northrop Grumman Systems Corporation |