NSN 5305-01-193-1494
High Torque Screw
8.00 millimeters fastener length, pan no. 2 head style, between 7.7 millimeters and 8.0 millimeters head diameter, head height: between 2.2 millimeters and 2.4 millimeters .
Manufacturer part number NA0089-040008 for national stock number 5305011931494.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-193-1494.
-
MPN or Model
NA0089-040008
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Direction
Right-hand -
Thread Length
8.0 millimeters -
Fastener Length
8.00 millimeters -
Head Style
Pan no. 2 -
Head Diameter
Between 7.7 millimeters and 8.0 millimeters -
Head Height
Between 2.2 millimeters and 2.4 millimeters -
Grip Diameter
4.0000 millimeters -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
4.0 millimeters -
Grip Length
8.00 millimeters -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Thread Pitch In Millimeters
0.7 -
External Thread Tolerance Class
4h6h -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Mj -
Specification Data
80205-na0089 professional/industrial association standard
More from these suppliers
- 5935-00-088-2378 MPN NAS715-19BElectrical Receptacle Connector
- 5935-00-978-8980 MPN NAS1196-2Electrical Connector Shell
- 5940-01-430-4123 MPN NAS1063A10-502ASTerminal Board Marker Strip
- 5940-01-451-4411 MPN NAS1063A2-107ALTerminal Board Marker Strip
- 1560-01-628-0450 MPN 9-66093Aircraft Channel
- 5940-01-384-3971 MPN NAS1063D2-2Terminal Board Marker Strip
- 5305-00-007-1557 MPN NAS1100C04-12PMachine Screw
- 5305-00-205-3597 MPN MS51958-71BMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-193-1494 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NA0089-040008 | National Aerospace Standards |