NSN 5305-01-193-6275
High Torque Screw
Between 0.323 inches and 0.343 inches fastener length, pan no. 2 head style, between 0.256 inches and 0.270 inches head diameter, head height: between 0.074 inches and 0.086 inches .
Manufacturer part number NAS5101-U1 for national stock number 5305011936275.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-193-6275.
-
MPN or Model
NAS5101-U1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.323 inches and 0.343 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.256 inches and 0.270 inches -
Head Height
Between 0.074 inches and 0.086 inches -
Grip Diameter
Between 0.1361 inches and 0.1367 inches -
Internal Drive Style
Tri-wing recess -
Thread Diameter
0.138 inches -
Grip Length
Between 0.052 inches and 0.072 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Iron alloy 660 -
Thread Series Designator
Unjf -
Specification Data
80205-nas5101 professional/industrial association standard
More from these suppliers
- 5935-01-063-4525 MPN NAS1668-1Electrical Connector End Seal Plug
- 5305-00-043-2680 MPN MS24694S97Machine Screw
- 5305-00-081-2651 MPN MS51038-15Setscrew
- 5305-00-174-8696 MPN NAS1219E3-10Machine Screw
- 5305-00-180-0256 MPN MILS7839Machine Screw
- 5305-00-206-4399 MPN NAS517-4-3Machine Screw
- 5305-00-225-9082 MPN MS90726-27Hexagon Head Cap Screw
- 5305-00-245-3593 MPN NAS1504-25Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-193-6275 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS5101-U1 | National Aerospace Standards |