NSN 5305-01-194-0643
High Torque Screw
Between 0.636 inches and 0.666 inches fastener length, flat countersunk head style, between 0.294 inches and 0.332 inches head diameter, grip diameter: between 0.1610 inches and 0.1635 inches .
Manufacturer part number GB510CH08C5 for national stock number 5305011940643.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-194-0643.
-
MPN or Model
GB510CH08C5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.314 inches and 0.364 inches -
Fastener Length
Between 0.636 inches and 0.666 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.294 inches and 0.332 inches -
Grip Diameter
Between 0.1610 inches and 0.1635 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.164 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5732 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 5305-00-040-9447 MPN HT4025DL5-26Close Tolerance Screw
- 5305-00-324-8486 MPN HT8137-3-6Close Tolerance Screw
- 5305-00-725-6903 MPN H804-440-7Socket Head Cap Screw
- 5305-00-965-8171 MPN SC111-10-16Machine Screw
- 5305-01-025-6962 MPN HT4049-4D15Close Tolerance Screw
- 5305-01-030-1768 MPN HT4024L4-15Close Tolerance Screw
- 5305-01-055-1148 MPN BACB30LU3-10Close Tolerance Screw
- 5305-01-055-3806 MPN VT1694F5-8Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-194-0643 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
GB510CH08C5 | Northrop Grumman Systems Corporation |
GB510CH08C5 | Arconic Global Fasteners & Rings, |
GB510CH08C5 | Sps Technologies, Llc |
GB510CH08C5 | Hi-shear Corporation |
GB510CH08C5 | Sps Technologies, Llc |
GB510CH08C5 | Lisi Aerospace Canada Corp |
GB510CH08C5 | Abounding Security Inc |
MATF111C08-5 | Abounding Security Inc |