NSN 5305-01-194-0652
High Torque Screw
Drive ribbed.
Manufacturer part number SFH22-4A17 for national stock number 5305011940652.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-194-0652.
-
MPN or Model
SFH22-4A17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.386 inches and 0.453 inches -
Fastener Length
Between 1.458 inches and 1.505 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium or cadmium and chromate -
Surface Treatment Specification
Nas672 assn standard 1st treatment response or mil-c-8837, ty2, cl2 military specification 2nd treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-487-5088 MPN VS2545T4F20TClose Tolerance Screw
- 5305-00-498-9729 MPN VT1051-3-1Close Tolerance Screw
- 5305-00-802-0574 MPN 51B221-4Close Tolerance Screw
- 5305-00-811-7282 MPN 51B333-56HMachine Screw
- 5305-01-076-4946 MPN SC1810-4-4Close Tolerance Screw
- 5305-01-143-2822 MPN HT4041-5-6M6YShoulder Screw
- 5305-01-195-0286 MPN BACB30LU3D8Close Tolerance Screw
- 5305-01-196-5092 MPN SC17866RE4-7Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-194-0652 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SFH22-4A17 | Sps Technologies, Llc |
106706T-3-A17 | Sps Technologies, Llc |
HT8181F4-17 | Alcoa Global Fasteners, Inc. |
SC1779-4-17 | Arconic Global Fasteners & Rings, |
PBF1202-4-17 | Sps Technologies, Llc |
HR204-4-17 | Hi-shear Corporation |
106706T-4-17 | Sps Technologies, Llc |
HR204-4-17 | Lisi Aerospace Canada Corp |
GB510CE4-17 | Northrop Grumman Systems Corporation |