NSN 5305-01-194-1504
High Torque Screw
Between 1.063 inches and 1.093 inches fastener length, pan head style, between 0.838 inches and 0.863 inches head diameter, head height: between 0.286 inches and 0.304 inches .
Manufacturer part number NAS1137-10 for national stock number 5305011941504.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-194-1504.
-
MPN or Model
NAS1137-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096630 - Screws NOI Brass/bronze/copper -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.428 inches and 0.478 inches -
Fastener Length
Between 1.063 inches and 1.093 inches -
Head Style
Pan -
Head Diameter
Between 0.838 inches and 0.863 inches -
Head Height
Between 0.286 inches and 0.304 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.438 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
18900 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1137 professional/industrial association standard
More from these suppliers
- 1560-01-423-0215 MPN NAS6706D19Aircraft Structural Component Support
- 5940-01-451-2574 MPN NAS1063C3-539CTerminal Board Marker Strip
- 5940-01-381-7222 MPN NAS1063B101-120Terminal Board Marker Strip
- 1680-01-651-3558 MPN 411N1281-4CRoller Shade
- 5305-00-008-5906 MPN NAS1189E02T6LSocket Head Cap Screw
- 5305-00-008-5914 MPN NAS1100C06-28Machine Screw
- 5305-00-051-2324 MPN MS51958-92Machine Screw
- 5305-00-052-6875 MPN MS24627-51Tapping Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-194-1504 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1137-10 | National Aerospace Standards |