NSN 5305-01-194-6364
High Torque Screw
Internal drive ribbed.
Manufacturer part number 123256-4R2432 for national stock number 5305011946364.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-194-6364.
-
MPN or Model
123256-4R2432
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.372 inches and 0.422 inches -
Fastener Length
Between 2.382 inches and 2.412 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.507 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 1.990 inches and 2.010 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 ph13-8 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-120-2159 MPN 265-131106-11Aircraft Trailing Edge
- 1560-00-144-6871 MPN 66-31080-1W Bulkhead Assembly
- 1560-00-144-6880 MPN 66-10005-9Win Fillet Assembly
- 1680-00-349-6199 MPN 180-53024-3Ejection Se Fitting
- 1560-00-961-6392 MPN 265-240320-21Rudder Beam
- 5935-01-189-3222 MPN LE482-0004-0422Electrical Connector Cable Clamp
- 5935-01-193-5518 MPN ES27467T25F35SElectrical Plug Connector
- 5935-01-195-0945 MPN ES27484T16F35SDElectrical Plug Connector
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-194-6364 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
123256-4R2432 | Sps Technologies, Llc |
AS303-24-32 | Avibank Mfg., Inc. |
LE111-0044-2432 | Boeing Company, The |