NSN 5305-01-194-6441
High Torque Screw
Between 0.698 inches and 0.728 inches fastener length, oval countersunk head style, between 0.297 inches and 0.302 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number A175.2306 for national stock number 5305011946441.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-194-6441.
-
MPN or Model
A175.2306
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.323 inches and 0.353 inches -
Fastener Length
Between 0.698 inches and 0.728 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.297 inches and 0.302 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
0.375 inches -
Thready Qty Per Inch (tpi)
32 -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-150-3242 MPN 202-15522-8A23Close Tolerance Screw
- 5305-01-054-6259 MPN AIC985-3-13PClose Tolerance Screw
- 5305-01-080-1702 MPN NAS1101E4-22Machine Screw
- 5305-01-134-9361 MPN SC2671-4-9Machine Screw
- 5305-01-168-3903 MPN AIC4040E4-04RClose Tolerance Screw
- 5305-01-246-3864 MPN AIC811-04-21Socket Head Cap Screw
- 5305-01-266-8381 MPN LD111-0044-2303Close Tolerance Screw
- 5305-01-349-7653 MPN 03A200-4-8AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-194-6441 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
A175.2306 | Huck International, Inc. |
SC1786R-3-06 | Arconic Global Fasteners & Rings, |
LE111-0035-2306 | Boeing Company, The |
PBF1381-2306 | Sps Technologies, Llc |
123179A3R6 | Sps Technologies, Llc |
LE111-0035-2306 | Sps Technologies, Llc |
LE111-0035-2306 | Seifert E R Inc Div Of |
A175.2306 | Huck Intl Inc |