NSN 5305-01-194-7053
High Torque Screw
Hole at threaded end reamed for press fit with plug.
Manufacturer part number CA2193-3-08 for national stock number 5305011947053.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-194-7053.
-
MPN or Model
CA2193-3-08
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.425 inches and 0.465 inches -
Fastener Length
Between 0.935 inches and 0.955 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.335 inches and 0.381 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.190 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Width Across Flats
Between 0.1253 inches and 0.1270 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-195-7944 MPN CAS1017-4-20Close Tolerance Screw
- 5306-01-518-8740 MPN CA21387-6-4TXInternal Wrenching Bolt
- 5306-01-518-8741 MPN CA21387-6-5TXInternal Wrenching Bolt
- 1560-00-109-7417 MPN 88-31084Aircr Door Assembly
- 1560-00-166-1845 MPN 88-52478Rudde Control Cable
- 5945-00-393-9716 MPN 168-54072-20Main P Box Assembly
- 1680-01-006-3039 MPN 65E34283-13Aircraft Seat Webbing Assembly
- 1560-01-066-7991 MPN 265-318060-11Le Fuselage Intercostal Assembly
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-194-7053 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CA2193-3-08 | Arconic Global Fasteners & Rings, |
LE111-0002-3008 | Boeing Company, The |
FIT01-0002-3008 | Fastener Innovation Technology, Inc. |
LE111-0002-3008 | Fastener Innovation Technology, Inc. |